Hexagon nut, inch
ASME B18.2.2 steel GR5 plain UNC
NUT-HX-FIN-GR5-(PL)-7/8_9
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 0.875 in |
Height (m1) | 0.776 in |
Width across flats (s1) | 1 5/16 inch |
Material | Steel |
Property class | GR5 |
Surface | Plain |
Thread type | UNC |
Number of thread starts per inch | 9 |
Other standard | 0 - not applicable |
Last viewed
Floor unit hanger
Raised countersunk tapping screw, C shape with H recessed head
ASSY®plus 4 CSMP SPECIAL universal screw Hardened zinc-plated steel partial thread countersunk head
Electronic solder no. 10
Vulcanised fibre disc Klingspor CS 561
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with metallic sealing edge, shape B
Washer with round hole Mainly for wood construction, DIN 440, zinc-plated steel, blue passivated (A2K)
Hexagon head bolt With thin shaft in hygienic design
Grooved taper-pin ISO 8744 steel plain
Slotted round head screw W-0231, steel 4.8, zinc-plated, with slot