Hexagon nut, inch
ASME B18.2.2 steel GR5 zinc plated yellow UNF
NUT-HX-FIN-GR5-(ZY)-1/4_28
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 1/4 in |
Height (m1) | 0.2260 in |
Width across flats (s1) | 7/16 inch |
Material | Steel |
Property class | GR5 |
Surface | Zinc plated yellow |
Thread type | UNF |
Number of thread starts per inch | 28 |
Last viewed
Work trousers
Work shirt
Self-adhesive hook and loop fastener tape
T-connector In accordance with DIN 74292 to DIN 74326
Composite profile Flex-Roll 38/38 For the perfect edge in dry walling
Safety boots, S3
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Ducting clamp Part 1 – Light series
Filter For Recycle Guard
Flat collar nut, wheel fastening