Hexagon nut, inch
ASME B18.2.2 steel GR8 zinc plated UNC
NUT-HX-FIN-GR8-(ZN)-7/16_14
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 7/16 in |
Height (m1) | 0.385 in |
Width across flats (s1) | 5/8 inch |
Material | Steel |
Property class | GR8 |
Surface | Zinc plated |
Thread type | UNC |
Number of thread starts per inch | 14 |
Other standard | 0 - not applicable |
Last viewed
Side basket For SUB Flex floor unit extension
Advent calendar with tool box 24 pcs
SDS stop drill bit for W-SD hammer-in anchor
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Work shirt
1/2 inch and 1/4 inch socket wrenches Assortment of 56 pieces
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 10.9, plain
34° half-head collated nails AN A2 stainless steel grooved resin-coated
Threaded piece
Christmas set desk in package 5 pcs