Hexagon nut, inch
ASME B18.2.2 steel GR8 zinc plated yellow UNC
NUT-HX-FIN-GR8-(ZY)-7/16_14
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 7/16 in |
Height (m1) | 0.385 in |
Width across flats (s1) | 5/8 inch |
Material | Steel |
Property class | GR8 |
Surface | Zinc plated yellow |
Thread type | UNC |
Number of thread starts per inch | 14 |
Last viewed
Threaded rod
Slotted set screw with truncated cone ISO 4766, brass, plain
AL 900 door handle on outer plate With CK punch
T-handle, TX with side tip
Conical countersink assortment Ruko ULTIMATECUT conical countersink set DIN 335 HSS RUnaTEC, 5 pcs.
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Floor-levelling mass CERAfix® 201-2
T-shirt twin pack
System connector SV 20 E