Hexagon nut, inch
ASME B18.2.2 stainless steel 18-8 plain UNF
NUT-HX-JAM-(18-8)-1_12
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in ASTM F594
18-8 is comparable with an A2 stainless steel.
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
 | |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Nominal diameter (D) | 1 in |
Number of thread starts per inch | 12 |
Thread type | UNF |
Height | 0.519 in |
Width across flats | 1 1/2 inch |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Low-cut safety shoes, S1
Equipotential bonding set steel
Hexalobular screw with flattened half round head and collar DIN 34805-2, TX drive, A2-070 stainless steel
Slotted flat-head screw DIN 85, A2-70 stainless steel, plain
Fall arrester device Pro with steel cable
Compact workshop trolley
TIPP® Aero ventilation pipe clamp
RW® bit
EPS profile double cylinder
Twist drill bit HSCo DIN 338 MFD Speed
