Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, brass, nickel-plated
DIN 985 brass, nickel-plated
NUT-HEX-STOP-DIN985-BRS-WS17-(E2J)-M10
Register now and access more than 125,000 products
DIN 985 has been withdrawn and replaced by ISO 10511. There is some limited similarity (thread M7, M18, M22, M27, M33 and threads with nominal diameter > M36 removed | Fine thread removed | Nut height changed | Width across flats changed for threads M10, M12 and M14 to 16, 18 and 21 mm | Strength classes changed to 04 and 05).
 | |
Thread type x nominal diameter (D) | M10 |
Height (m1) | 6.5 mm |
External drive (s1) | WS17 |
Standards | DIN 985 |
Material | Brass |
Surface | Nickel plated |
RoHS-compliant | Yes |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagon head bolt With shank, structural bolting assembly, DIN EN 15048-1
RR02 panic tubular frame mortise lock
Pipe cable lug Without inspection hole
Dry sandpaper sheet Mirka WPF
Threaded rod
TIPP® Smartlock GS pipe clamp
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain
Pocket tape measure
Slotted set screw with pin DIN 417, steel, 14H, plain
