Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, brass, nickel-plated
DIN 985 brass, nickel-plated
NUT-HEX-STOP-DIN985-BRS-WS7-(E2J)-M4
Register now and access more than 125,000 products
DIN 985 has been withdrawn and replaced by ISO 10511. There is some limited similarity (thread M7, M18, M22, M27, M33 and threads with nominal diameter > M36 removed | Fine thread removed | Nut height changed | Width across flats changed for threads M10, M12 and M14 to 16, 18 and 21 mm | Strength classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M4 |
Height (m1) | 2.9 mm |
External drive (s1) | WS7 |
Standards | DIN 985 |
Material | Brass |
Surface | Nickel plated |
RoHS-compliant | Yes |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Round head screw with square neck and nut DIN 603, steel 4.8, plain, with nut
Protective glove, knitted and coated
Twist drill bit HSCo8 WN MAGMA
Safety shoe S1
O-ring, metric
Corvus suede S3 safety boots
Twist drill bit, metal Ruko DIN 338 TL 3000 HSS-G plain 130°
Reserve taper grooved dowel pins ISO 8741 steel zinc-plated
Counterbore Ruko HSS with morse taper and fixed pilot for thread core holes