Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, brass, plain
DIN 985 brass, plain
NUT-HEX-STOP-DIN985-BRS-WS7-M4
Register now and access more than 125,000 products
DIN 985 has been withdrawn and replaced by ISO 10511. There is some limited similarity (thread M7, M18, M22, M27, M33 and threads with nominal diameter > M36 removed | Fine thread removed | Nut height changed | Width across flats changed for threads M10, M12 and M14 to 16, 18 and 21 mm | Strength classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M4 |
Height (m1) | 5 mm |
External drive (s1) | WS7 |
Standards | DIN 985 |
Material | Brass |
Surface | Plain |
RoHS-compliant | Yes |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Safety boots S2 Uvex1 XCraft 6815
Plastic drum tap For 200 l plastic drum with 2 inch connection
Charger AL 60-LI For rechargeable battery LI-12 volt
Universal electrician's tool case 38 pieces
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Threaded rod DIN 976, A2-70 stainless steel, shape A
Wide brush LA For glazes
Bracket latch, rotating for insect protection
Case insert for MASTER/M-CUBE power tools
End distributor cabinet W-EV 63/22-6/G/E/X