Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, brass, plain
DIN 985 brass, plain
NUT-HEX-STOP-DIN985-BRS-WS8-M5
Register now and access more than 125,000 products
DIN 985 has been withdrawn and replaced by ISO 10511. There is some limited similarity (thread M7, M18, M22, M27, M33 and threads with nominal diameter > M36 removed | Fine thread removed | Nut height changed | Width across flats changed for threads M10, M12 and M14 to 16, 18 and 21 mm | Strength classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M5 |
Height (m1) | 5 mm |
External drive (s1) | WS8 |
Standards | DIN 985 |
Material | Brass |
Surface | Plain |
RoHS-compliant | Yes |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
System workbench 2000 mm with 2 drawer undercounter cabinets 8.6
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Compartment rail For drawer cabinets made from zinc-plated sheet steel with slots on both sides
Cover cap
Movement joint profile For movement joints, both flush and internal corner joints
Handle
Universal trap for sinks Polypropylene white
Cetus shorts
Pipe linch pin
Four-way L-distributor