Hexagon nut with clamping piece (all-metal) fine thread DIN 980, steel, strength class 10, zinc-nickel-plated (P3E)
DIN 980 V, steel I10I, zinc-nickel, fine thread
NUT-SLOK-DIN980-V-I10I-WS27-P3E-M18X1,5
Register now and access more than 125,000 products
Protection against loss by crushing the nut body
DIN 980 has been withdrawn and replaced by ISO 10513. There is some limited similarity (thread M18×2, M18×1.5, M20×2, M22×2, M22×1.5, M27×2, M33×2 and M39×3 removed | Nut height changed | Width across flats changed for M10, M12 and M14 to 16, 18 and 21 mm | Standard thread included in ISO 7042 | Strength class 5 removed | ISO 10513 applies to the strength classes 8, 10, 12).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter x pitch (D) | M18 x 1.5 |
Height (m1) | 18 mm |
External drive (s1) | WS27 |
Standards | DIN 980 |
Material | Steel |
Property class | I10I |
Surface | Zinc nickel |
RoHS-compliant | Yes |
Corrosion protection period | 720 h |
Locking device operating principle | Single part clamping nut metal |
Locking function | Locking against loosening by clamping |
Last viewed
Eye bolt DIN 444, A4 stainless steel, plain, shape B
Threaded rod DIN 976, A2-70 stainless steel, shape A
1-component thick-film lacquer
Stud with threaded end ≈ 1.25 d for pressure container construction DIN 939, A4/70 stainless steel, plain
Single wire seal (SEAL) For uninsulated cable connector
HSCo8 end mill, short, centre-cutting DIN 844K
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
3/4-inch impact socket wrench insert hexagon, metric, short
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Levelling foot set for system cabinet and system workbench