Welcome to Würth Aerospace Solutions For trade customers only
Hexagon nut with clamping piece (non-metal insert) - NUT-HEX-STOP-DIN6924-8-SW34-(ZFSHL)-M22 Hexagon nut with clamping piece (non-metal insert) - NUT-HEX-STOP-DIN6924-8-SW34-(ZFSHL)-M22
Hexagon nut with clamping piece (non-metal insert) - NUT-HEX-STOP-DIN6924-8-SW34-(ZFSHL)-M22 - 1
Hexagon nut with clamping piece (non-metal insert) - NUT-HEX-STOP-DIN6924-8-SW34-(ZFSHL)-M22 - 2

Hexagon nut with clamping piece (non-metal insert)

ISO 7040 steel 8 zinc-flake silver
NUT-HEX-STOP-DIN6924-8-SW34-(ZFSHL)-M22

Art.-no. 453440222
EAN 4056807618579
All versions

Prices for customers after login
Hexagon nut with clamping piece (non-metal insert)

Art.-no. 453440222

Prices for customers after login
Quantity
PU
x 50 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

ISO 7040, steel, strength class 8, zinc-flake coating, silver (ZFSHL)

Zinc flake coatings are chrome (VI)-free corrosion protection coatings for commercial vehicle construction, construction machines, agricultural vehicles and equipment, and all other fields that require vehicle construction standard corrosion protection requirements.



The corrosion resistance of ZFHSL is as follows:


  • Diameter ≥ M6 - 480h*

  • Diameter ≥ M10 - 720h*


  • * Guideline values: No base metal corrosion at points without thread in salt spray mist testing according to DIN EN ISO 9227 NSS.


    • The designation ZFSHL refers to the following corrosion coating:


    • Zinc flake coating, with top coat, silver colour, with lubrication that alters the friction coefficient.

    • Adjusted friction coefficient range from 0.09μ - 0.14μ due to top coat with integrated lubricating particles

    Notice

    ISO 7040 replaces DIN 982 | There is some limited similarity | Thread M7, M18, M22 removed | Thread M3, M4, M30 and M36 added | Nut height changed | Width across flats changed for thread M10, M12 and M14 to 16, 18 and 21 mm | Fine thread included in ISO 10512 | Strength class 12 removed | ISO 7040 applies to the strength classes 5, 8, 10.

    Product information

    Würth Catalogue

    Datasheets(X)

    Certificates/ Documents

     | 

     | 

    Thread type x nominal diameter (D)

    M22

    Height (h1)

    25 mm

    External drive (s1)

    WS34

    Standards

    ISO 7040

    Material

    Steel

    Property class

    8

    Surface

    Flake zinc silver

    RoHS-compliant

    Yes

    Corrosion protection period

    720 h

    Locking device operating principle

    Clamping part polyamide ring

    Locking function

    Locking against loosening by clamping

    Art.-no.
    Cust. Mat. No.

    Hazardous Material

    Product information

    Würth Catalogue

    Datasheets()

    Datasheets ()

    CAD data  | 

    Certificates/ Documents

     | 

     | 

    Technical information
    Show all product details