Hexagon nut with fine thread DIN 934, steel I8I, zinc-plated yellow chromated (A2C)
DIN 934 steel I8I zinc plated yellow fine thread
NUT-HEX-DIN934-I8I-WS17-(A2C)-M10X1,25
Register now and access more than 125,000 products
Hexagonal nuts complying with DIN 934 cannot support test loads as per DIN EN ISO 898-2.
- The strength class designation has two vertical bars added before and after the strength code to differentiate.
DIN 934 has been withdrawn and replaced by ISO 4032/8673. There is no similarity (nominal Ø changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter x pitch (D) | M10 x 1.25 |
Height (m1) | 8 mm |
External drive (s1) | WS17 |
Standards | DIN 934 |
Material | Steel |
Property class | 8 |
Surface | Zinc plated yellow |
RoHS-compliant | No |
Thread type | Metric thread |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Slotted countersunk head screw DIN 963, steel 4.8, nickel-plated (E2J)
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Push-in dividers For bulk good strips
Protective caps GPN 255 Silicone (SI), natural
System bolt For system connector SV 20 E
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
EPS profile double cylinder
Stud with threaded end ≈ 1.25 d
Tooth-form cutter HSS pressure angle 20°