Hexagon nut with fine thread
ISO 8673 steel 10 zinc flake fine thread
NUT-HEX-ISO8673-10-WS36-(ZFSHL)-M24X2,0
Register now and access more than 125,000 products
Zinc-flake coatings are chrome-(VI)-free corrosion protection coatings for commercial vehicle assembly, construction machinery, agricultural vehicles and equipment, and all other areas that have corrosion protection requirements at vehicle construction level.
Corrosion resistance for ZFSHL is:
- Diameter ≥ M6 - 480h*
- Diameter ≥ M10 - 720h*
The designation ZFSHL refers to the following corrosion coating:
- Zinc-flake coating, with top coat, silver colour, with friction value adjusted lubrication.
- Adjusted friction coefficient range from 0.09μ – 0.14μ due to top coat with integrated lubricating particles
ISO 8673 replaces DIN 934 | There is no similarity | Nominal Ø changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | ISO 8673 only regulates fine thread | Standard thread included in ISO 4032.
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M24 x 2 |
Height (m1) | 21.5 mm |
External drive (s1) | WS36 |
Standards | ISO 8673 |
Material | Steel |
Property class | 10 |
Hardness category | 0 - not applicable |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Corrosion protection period | 720 h |
Area of application | 0 - not applicable |
Thread form | Fine pitch thread |
Thread type | Metric thread |
Last viewed
Hexagonal bolt with shank
Safety boots, S3
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)
Countersunk tapping screw with tip, shape C with AW drive WN 112, A2 stainless steel
Inside drawer For system hinged door cabinet
Concrete screw with hexagon head W-BS/S
ASME B18.2.1 steel GR5 hot-dip galvanised
ASSY®plus 4 CSMP universal screw Hardened zinc-plated steel, partial thread, countersunk milling pocket head
Low-cut safety shoes, S2
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and cross recess shape Z