Hexagon nut with flange and clamping piece (full metal)
EN 1664 steel 10, zinc flake, silver
NUT-HEX-FLG-EN1664-10-WS13-(ZFSHL)-M8
Register now and access more than 125,000 products
Zinc-flake coatings are chrome-(VI)-free corrosion protection coatings for commercial vehicle assembly, construction machinery, agricultural vehicles and equipment, and all other areas that have corrosion protection requirements at vehicle construction level.
Corrosion resistance for ZFSHL is:
- Diameter ≥ M6 - 480h*
- Diameter ≥ M10 - 720h*
The designation ZFSHL refers to the following corrosion coating:
- Zinc-flake coating, with top coat, silver colour, with friction value adjusted lubrication.
- Adjusted friction coefficient range from 0.09μ – 0.14μ due to top coat with integrated lubricating particles
ISO EN 1664 replaces DIN 6927 | There is some limited similarity | Nuts with fine thread included in DIN EN 1667 | Nut height changed | Width across flats changed from 15 mm to 16 mm for M10 dimension.
Datasheets(X)
Last viewed
Pass-through ratchet adapter For 1/4-inch bits
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
1/4" socket wrench insert metric, long
GPN 210 grip cap Ethylene vinyl acetate (EVA), free from plasticisers, yellow
Stud with threaded end ≈ 1 d
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
Hexagonal bolt with shank for pressure container construction ISO 4014, A4 stainless steel