Hexagon socket set screw with flattened tip ISO 4027, A4 stainless steel, 21H, plain
ISO 4027 stainless steel A4 21H plain
SCR-CONEPT-ISO4027-A4-21H-IH1,3-M2,5X5
Register now and access more than 125,000 products
Hardness class 21H corresponds to a hardness of 210 HV
The standard tip has an angle of 90°, but very short lengths have an angle of 120°.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for pulling loads.
ISO 4027 replaces DIN 914 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 omitted | Hardness classes for stainless steels introduced.
Datasheets(X)
Last viewed
Safety boots S2 Uvex1 XCraft 6815
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Y-shaped angled push-in fitting with male and female thread
Lock nut DIN 7967, zinc-plated steel, blue passivated (A2K)
Replacement lens uvex skyper 9195
Holding magnet For hand-held lamps
Protective glove, knitted and coated
Sandpaper disc Klingspor PS 22 K
Castellated nut, low profile DIN 937, steel 17H, plain