Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
ISO 4029 steel 45H, plain
SCR-RGCTR-ISO4029-45H-HS12-M24X80
Register now and access more than 125,000 products
Hardness class 45H corresponds to a hardness of 450 HV
ISO 4029 replaces DIN 916 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.
Datasheets(X)
CAD data (available after login)
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Improper application is likely if set screws are welded, tightened and secured with nuts or subjected to bending. Any application of tensile stress is considered improper use and can result in malfunction.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
 | |
Thread type x nominal diameter (d1) | M24 |
Length (l1) | 80 mm |
Ring cutter diameter (d2) | 16 mm |
Internal drive (s1) | HS12 |
Standards | ISO 4029 |
Material | Steel |
Surface | Plain |
Hardness category | 45H |
Drive type | Hexagon socket |
Shape of tip | Cup point |
RoHS-compliant | Yes |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
KSP-1 LED clothes rail profile
Hydraulic trolley jack RH-6 With a robust frame construction and a load capacity of 6,000 kg
Akura 44 profile thumbturn cylinder
ASSY® 4 RCS fittings screw Steel zinc plated full thread raised countersunk head
Compact workshop trolley
Safety boots, S3
Cover cap for 3D hinges
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
EPS profile thumbturn cylinder