Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
ISO 4029 steel 45H, plain
SCR-RGCTR-ISO4029-45H-IH0,9-M2X2
Register now and access more than 125,000 products
Hardness class 45H corresponds to a hardness of 450 HV
ISO 4029 replaces DIN 916 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.
Datasheets(X)
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Improper application is likely if set screws are welded, tightened and secured with nuts or subjected to bending. Any application of tensile stress is considered improper use and can result in malfunction.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
 | |
null | null |
Last viewed
3/4-inch impact socket wrench insert hexagon, metric, short
Work dungarees
Wing nut, round wing shape (German type)
Hexagonal bolt with shank
OrgaAer steel drawer
Low-cut safety shoes, S1P
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Safety boots, S3
Work dungarees
Reserve taper grooved dowel pin ISO 8741 A1 stainless steel plain