Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc flake, silver (ZFSHL)
ISO 4029 steel 45H zinc flake
SCR-RGCTR-ISO4029-45H-HS3-(ZFSHL)-M6X10
Register now and access more than 125,000 products
Zinc flake coatings are chrome (VI)-free corrosion protection coatings for commercial vehicle construction, construction machines, agricultural vehicles and equipment, and all other fields that require vehicle construction standard corrosion protection requirements.
The corrosion resistance of ZFHSL is as follows:
- Diameter ≥ M6 - 480h*
- Diameter ≥ M10 - 720h*
The designation ZFSHL refers to the following corrosion coating:
- Zinc flake coating, with top coat, silver colour, with lubrication that alters the friction coefficient.
- Adjusted friction coefficient range from 0.09μ - 0.14μ due to top coat with integrated lubricating particles
Hardness class 45H corresponds to a hardness of 450 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 4029 replaces DIN 916 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 10 mm |
Ring cutter diameter (d2) | 3 mm |
Internal drive (s1) | HS3 |
Standards | ISO 4029 |
Material | Steel |
Surface | Flake zinc silver |
Hardness category | 45H |
Drive type | Hexagon socket |
Shape of tip | Cup point |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagon nut ISO 4032 brass, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Slotted set screw with truncated cone DIN 551, A4 stainless steel, plain
Stirrup handle on outer plate
Base height adjuster, type C Press-fit
Pre-charged NiMH high-capacity rechargeable battery Pre-charged
Low-cut safety shoes Elten Maddox 729571 Vestas
Plus Quadro-L Vario hammer drill bit
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
Countersunk rivet
