Hexagon socket set screw with ring cutter
ASME B18.3 steel alloy UNC
SCR-HX-SOC-SET-CUPPTA-ALLOY-4_40X1/8
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
The "alloy" strength class is comparable with the metric strength class 12.9 and is regulated in the ASTM F912 standard.
Standard thread tolerance according to ASME B1.1 = 3A (for external thread)
Datasheets(X)
 | |
Nominal diameter (d1) | 0.111 in |
Length (l1) | 0.125 in |
Internal drive (s1) | HS005 inch |
Standards | ASME B18.3 |
Material | Alloy |
Surface | Plain |
Thread type | UNC |
Number of thread starts per inch | 40 |
Last viewed
Single guide rail for Redoslide
Special socket for diesel fuel filter Ford Custom 2.0 TDCi
Parallel pin with chamfered ends DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h11
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagonal nut, low profile DIN 439, steel 04/05, zinc-plated, blue passivated (A2K)
Fixing bolt anchor W-FA/S with long U washer for timber construction
Countersunk head screw with recessed head, H ISO 7046-1, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal nut with clamping piece (all-metal) DIN 6925, steel 10, copper-plated (C2)
Performance shorts
Contact spray Oxidation protection