Hexagon socket set screw with ring cutter UNBRAKO®
ISO 4029 steel 45H plain UNBRAKO
SCR-RGCTR-ISO4029-UNBRAKO-MSP-45H-M10X16
Register now and access more than 125,000 products
Advantages of UNBRAKO® set screws:
- E-Code: Alphanumeric head stamping for traceability
- Rolled thread with narrow tolerances
- Regular inspection for thread faults in manufacture
Hardness class 45H corresponds to a hardness of 450 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 4029 replaces DIN 916 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M10 |
Length (l1) | 16 mm |
Ring cutter diameter (d2) | 6 mm |
Internal drive (s1) | HS5 |
Standards | ISO 4029 |
Material | Steel |
Surface | Plain |
Hardness category | 45H |
RoHS-compliant | Yes |
Last viewed
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head
Pull handle ST/A100
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Work dungarees
Sanding belt, fabric VSM KK791Y
Short sanding belt Klingspor LS 309 XH
Slipper S2 safety shoe
Nail setting tool For manual drive-in stud
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, NPT male thread