Hexagon socket set screw with ring cutter UNBRAKO®
ISO 4029 steel 45H plain UNBRAKO
SCR-RGCTR-ISO4029-UNBRAKO-MSP-45H-M5X8
Register now and access more than 125,000 products
Advantages of UNBRAKO® set screws:
- E-Code: Alphanumeric head stamping for traceability
- Rolled thread with narrow tolerances
- Regular inspection for thread faults in manufacture
Hardness class 45H corresponds to a hardness of 450 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 4029 replaces DIN 916 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.
Datasheets(X)
Last viewed
PVC single core H05/H07V-K, fine wire
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, A2 stainless steel, plain. With cross recess.
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
Blanking plug for rubber module
High-visibility work dungarees
Angle connector Type A
Work dungarees