Hexagon socket set screw with ring cutter UNBRAKO®
ISO 4029 steel 45H plain UNBRAKO
SCR-RGCTR-ISO4029-UNBRAKO-MSP-45H-M6X8
Register now and access more than 125,000 products
Advantages of UNBRAKO® set screws:
- E-Code: Alphanumeric head stamping for traceability
- Rolled thread with narrow tolerances
- Regular inspection for thread faults in manufacture
Hardness class 45H corresponds to a hardness of 450 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 4029 replaces DIN 916 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 8 mm |
Ring cutter diameter (d2) | 3 mm |
Internal drive (s1) | HS3 |
Standards | ISO 4029 |
Material | Steel |
Surface | Plain |
Hardness category | 45H |
RoHS-compliant | Yes |
Last viewed
Slotted headless screw with flat point DIN 427, steel, 14H, plain
UV 50 sun protection spray
Disposable protective suit uvex 5/6 classic 98449
Hexagonal bolt with shank and fine thread DIN 960, steel 8.8, plain
Hexagonal bolt with shank and fine thread DIN 960, steel 8.8, plain
Twist drill bit, metal Ruko DIN 338 HSS-G TiN 130°
Helical insert W.TEC® INSERT COIL Screw Grip
Work shorts
Safety boots, S3
Colour – blind rivets Round pan head