Hexagonal bolt
ASME B18.2.1 steel L7 hot dip galv. with cert. 3.1
Q/SCR-B18.2.1-L7-HDG-1 1/8_8X210-SP-3.1
Register now and access more than 125,000 products
- Thread up to head and rolled
Datasheets(X)
 | |
Nominal diameter (d1) | 1.125 in |
Length (l1) | 210 mm |
Thread type | Unified thread (US, UK, CA) |
Head height (k1) | 0.687 in |
External drive (s1) | WS1 11/16 |
Material | Steel |
Property class | L7 |
Surface | Hot dip galvanized |
Width across flats | 1 11/16 inch |
Last viewed
Silicone remover
Slotted flat-head screw DIN 85, steel 4.8, zinc-plated, blue passivated (A2K)
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
Cutting disc for steel
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Manual screw tap, assortment 3-piece Ruko hand tap cassette HSS DIN 352 Whitworth BSW 3 pieces
Sundström filter adapter SR 280-3
Crimping jaws For crimping tool B12
Twin wheel swivel machinery castor Hard with bolt hole
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal