Hexagonal bolt
ASME B18.2.1 stainless steel 18-8 plain
SCR-HCS-(18-8)-3/4_10X3 1/2
Register now and access more than 125,000 products
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
18-8 is comparable with an A2 stainless steel. The mechanical properties are based on ASTM F593
Datasheets(X)
 | |
Nominal diameter (d1) | 3/4 in |
Length (l1) | 3 1/2 in |
Thread type | UNC |
Head height (k1) | 0.483 in |
External drive (s1) | WS1 1/8 |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Width across flats | 1 1/8 inch |
Last viewed
Latex cover for float
VS SUB SIDE diagonal cupboard pull-out
Hexagonal nut, low profile DIN 439, A4 stainless steel, plain
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Identification rings, PVC
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
T-shaped plug connector T-piece, pneumatic air, automation
Hexagonal bolt
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagon head sealing plug with collar