Hexagonal bolt
ASME B18.2.1 stainless steel 18-8 plain
SCR-HCS-(18-8)-3/4_10X5
Register now and access more than 125,000 products
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
18-8 is comparable with an A2 stainless steel. The mechanical properties are based on ASTM F593
Datasheets(X)
 | |
Nominal diameter (d1) | 3/4 in |
Length (l1) | 5 in |
Thread type | UNC |
Head height (k1) | 0.483 in |
External drive (s1) | WS1 1/8 |
Material | Stainless steel AISI 304, 18-8 |
Property class | 0 - not applicable |
Surface | Plain |
Width across flats | 1 1/8 inch |
Other standard | 0 - not applicable |
Last viewed
ASSY® 4 PII CSMP universal screw Steel zinc-plated partial thread with underhead thread milling pocket head
Intermediate layer for ISO D clamping system
EPS profile thumbturn cylinder
Combination wrench, inch with POWERDRIV®
Bitumen tape Bitu Roll KSK
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
34° half-head collated nails AN
Machinist's hammer German design in accordance with DIN 1041
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
SC short twist drill bit DIN 6539