Hexagonal bolt
ASME B18.2.1 stainless steel 18-8 plain
SCR-HCS-(18-8)-3/4_16X6
Register now and access more than 125,000 products
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
18-8 is comparable with an A2 stainless steel. The mechanical properties are based on ASTM F593
Datasheets(X)
 | |
Nominal diameter (d1) | 3/4 in |
Length (l1) | 6 in |
Thread type | UNF |
Head height (k1) | 0.483 in |
External drive (s1) | WS1 1/8 |
Material | Stainless steel AISI 304, 18-8 |
Property class | 0 - not applicable |
Surface | Plain |
Width across flats | 1 1/8 inch |
Last viewed
EPS profile thumbturn cylinder
Stud with threaded end ≈ 1.25 d
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, tapered BSPT male thread
Spherical roller bearing
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Double headband Sundström R01-2002
REPLAST Plastic primer
Glazing block With slip protection
HSS WN type RN double-ended drill bit
Hexagonal bolt with shank ISO 4014, steel 10.9, plain