Hexagonal bolt
ASME B18.2.1 stainless steel 18-8 plain
SCR-HCS-(18-8)-5/8_18X2
Register now and access more than 125,000 products
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
18-8 is comparable with an A2 stainless steel. The mechanical properties are based on ASTM F593
Datasheets(X)
 | |
Nominal diameter (d1) | 5/8 in |
Length (l1) | 2 in |
Thread type | UNF |
Head height (k1) | 0.403 in |
External drive (s1) | WS15/16 |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Width across flats | 15/16 inch |
Last viewed
D-anchor timber screw
Hexagon nut, high profile with clamping piece (non-metal insert), inch
Key rosette pair AL 30
Quick-action lever clamp made completely of steel
Ratchet magazine screwdriver Vehicle/metal
Work trousers
ELMO® two-pole voltage tester DUO PLUS with FI/RCD trigger test
T-piece, reduced with solder connection EN1254, copper, 5130R
Daily Race S1P low-cut safety shoes
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive