Hexagonal bolt
ASME B18.2.1 stainless steel 316 plain
SCR-HCS-(316)-5/16_18X3
Register now and access more than 125,000 products
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
316 is comparable with an A4 stainless steel. The mechanical properties are based on ASTM F593
Datasheets(X)
 | |
Nominal diameter (d1) | 5/16 in |
Length (l1) | 3 in |
Thread type | UNC |
Head height (k1) | 0.211 in |
External drive (s1) | WS1/2 |
Material | Stainless steel AISI 316 |
Property class | 0 - not applicable |
Surface | Plain |
Width across flats | 1/2 inch |
Last viewed
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Lock washer S Spring steel with mechanically applied zinc coating (≤ dia. 3.5 zinc-plated, blue passivated)
Stud with threaded end ≈ 1 d DIN 938, A2/70 stainless steel, plain
Pan Head screw with hexalobular head ISO 14583, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Short sanding belt Klingspor LS 309 XH
Hexagon nut, high profile with fine thread
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Dust-free sanding system foam adapter
Ducting clamp Part 1 – Light series