Hexagonal bolt
ASME B18.2.1 steel GR2 zinc-plated
SCR-HCS-GR2-(ZN)-3/8_16X8
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Datasheets(X)
 | |
Nominal diameter (d1) | 3/8 in |
Length (l1) | 8 in |
Thread type | UNC |
Head height (k1) | 0.243 in |
External drive (s1) | WS9/16 |
Material | Steel |
Property class | GR2 |
Surface | Zinc plated |
Width across flats | 9/16 inch |
Other standard | 0 - not applicable |
Last viewed
Wheel brush Crimped steel, with shank
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
HSCo Longlife TiAlN+ red-ring machine tap for through holes DIN 371/376
Hexagon head bolt with shank and fine thread ISO 8765, steel 10.9, plain
Low-cut safety shoes, S1P
Slotted countersunk head screw DIN 963, steel 4.8, nickel-plated (E2J)
HSCo DIN 338 type RN MFD VARIO twist drill bit assortment 19 pieces
Cetus trousers with holster pockets
Dispenser For adhesive-free latex-free plasters
Swivel hoist ring QC 8