Hexagonal bolt
ASME B18.2.1 steel GR2 zinc-plated
SCR-HCS-GR2-(ZN)-7/16_14X3/4
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Datasheets(X)
 | |
Nominal diameter (d1) | 7/16 in |
Length (l1) | 3/4 in |
Thread type | UNC |
Head height (k1) | 0.291 in |
External drive (s1) | WS5/8 |
Material | Steel |
Property class | GR2 |
Surface | Zinc plated |
Width across flats | 5/8 inch |
Last viewed
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
WÜPOFAST® A2 chipboard screw A2 stainless steel, partial thread, countersunk head, PZ
Washer with large outside diameter DIN 9021, brass, plain
Shim ring DIN 988, steel, plain
Hexagonal bolt, fully threaded with nut, SB fittings, DIN EN 15048-1 ISO 4017, A4-70 stainless steel, plain, with nut ISO 4032
Insulated corrugated pipe
Identification rings, PVC
Threaded fitting
Work dungarees
Safety boots, S3