Hexagonal bolt
ASME B18.2.1 steel GR5 plain
SCR-HCS-GR5-(PL)-1 1/4_7X4
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Datasheets(X)
 | |
Nominal diameter (d1) | 1-1/4 in |
Length (l1) | 4 in |
Thread type | UNC |
Head height (k1) | 0.813 in |
External drive (s1) | WS1 7/8 |
Material | Steel |
Property class | GR5 |
Surface | Plain |
Width across flats | 1 7/8 inch |
Last viewed
Hexagonal bolt, with thread to head and fine thread ISO 8676, steel 8.8, plain
Work shorts
Joint mortar CERAfix® 506 For natural-stone and ceramic floor and wall coverings from 1-10 mm
SNAP marker
Impact sleeve set for insect protection
EPS key
W-FAZ/S-UH Fixanchor with large washer for timber construction DIN EN ISO 7094 (DIN 440)
Asbestos sheeting sack With skirting and fastener bands
Straight male fitting ISO 8434-1, stainless steel 1.4571, NPT male thread
Slotted cheese head DIN 84, brass, plain