Hexagonal bolt
ASME B18.2.1 steel GR5 zinc-plated UNC
SCR-HCS-GR5-(ZN)-7/16_14X5
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Datasheets(X)
 | |
Nominal diameter (d1) | 7/16 in |
Length (l1) | 5 in |
Thread type | UNC |
Head height (k1) | 0.281 in |
External drive (s1) | WS5/8 |
Material | Steel |
Property class | GR5 |
Surface | Zinc plated |
Width across flats | 5/8 inch |
Other standard | 0 - not applicable |
Last viewed
IFI-111 steel case-hardened zinc-plated serr.
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
Countersunk tapping screw, shape C with hexalobular drive
Wood screw, hexagon head inch
Hexagon nut with fine thread
Threaded pin DIN 551, A1 stainless steel, plain
Hexagonal bolt
Screw-on fastening base
Abrasive cloth roll Klingspor KL 361 JF
Plus Quadro-L Vario hammer drill bit