Hexagonal bolt
ASME B18.2.1 steel GR8 plain
SCR-HCS-GR8-(PL)-1/2_13X4
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Datasheets(X)
 | |
Nominal diameter (d1) | 1/2 in |
Length (l1) | 4 in |
Thread type | UNC |
Head height (k1) | 0.323 in |
External drive (s1) | WS3/4 |
Material | Steel |
Property class | GR8 |
Surface | Plain |
Width across flats | 3/4 inch |
Last viewed
Hexagonal bolt with shank and fine thread
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
ECOFAST® chipboard screw Steel, zinc-plated yellow, partial thread, countersunk milling head, PZ drive
Impact cap uvex u-cap hi-viz, short peak
Hexagonal bolt with shank DIN 931, steel 8.8U, hot-dip galvanised
W-SL connector lock bar thread
Low-cut safety shoes, S1
Clamping pin/clamping sleeve
Hammer drill bit Plus Quadro-S
Low-cut safety shoes, S2