Hexagonal bolt
ASME B18.2.1 steel GR8 plain
SCR-HCS-GR8-(PL)-3/4_10X5
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Datasheets(X)
 | |
Nominal diameter (d1) | 3/4 in |
Length (l1) | 5 in |
Thread type | UNC |
Head height (k1) | 0.483 in |
External drive (s1) | WS1 1/8 |
Material | Steel |
Property class | GR8 |
Surface | Plain |
Width across flats | 1 1/8 inch |
Other standard | 0 - not applicable |
Last viewed
Plastic frame anchor W-UR 10 XS W-UR 10 XS for use in perforated brick with small chambers and thin webs in conjunction with the AMO Combi screw
Hexagonal bolt with thread up to the head DIN 933, steel 12.9, plain
pias® drilling screw, flat head with AW drive
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Taper-grooved dowel pin ISO 8745 steel plain
Knob cylinder 3KS
Hexagonal bolt with thread up to the head
Hexagon head bolt With thin shaft in hygienic design
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
TX bit