Hexagonal bolt
ASME B18.2.1 steel GR8 plain
SCR-HCS-GR8-(PL)-5/8_11X1 1/2
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Datasheets(X)
 | |
Nominal diameter (d1) | 5/8 in |
Length (l1) | 1-1/2 in |
Thread type | UNC |
Head height (k1) | 0.403 in |
External drive (s1) | WS15/16 |
Material | Steel |
Property class | GR8 |
Surface | Plain |
Width across flats | 15/16 inch |
Other standard | 0 - not applicable |
Last viewed
Mixing paddle R I For liquid materials
ASSY® 4 CSMP ZiNi timber screw Steel zinc-nickel partial thread countersunk milling pocket head
Hexagon Socket Head Cap Screw
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
E 6.3 PZ bit (1/4 inch)
Raised countersunk head screw with Z recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Flat Washers
WN type RN facade construction drill bit