Hexagonal bolt
ASME B18.2.1 steel GR8 zinc-plated
SCR-HCS-GR8-(ZN)-3/8_24X1 1/2
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Datasheets(X)
 | |
Nominal diameter (d1) | 3/8 in |
Length (l1) | 1 1/2 in |
Thread type | UNF |
Head height (k1) | 0.243 in |
External drive (s1) | WS9/16 |
Material | Steel |
Property class | GR8 |
Surface | Zinc plated |
Width across flats | 9/16 inch |
Last viewed
Raised countersunk head screw with recessed head, H ISO 7047, steel 4.8, zinc-plated thick-film passivated (ZSML)
Special drill bit For plastic sleeves, dia. 14 mm
Paint roller DW For dispersions and wall paints
Adapter shaft for MBS HW cylinder saws
Safety boots, S2
PRINETO tacker needle with double hook
Dust-free sanding system foam adapter
Bracket set For DWD XP wooden back panel H86 frame system
Screw tap, manual, second tap Ruko hand tap HSCo DIN 352 second tap
Heat-shrink crimp connector, HIGH-END blade connector