Hexagonal bolt
ASME B18.2.1 steel GR8 zinc-plated trivalent UNC
SCR-HCS-GR8-(ZT)-1/2_13X2
Register now and access more than 125,000 products
Mechanical properties are regulated in SAE J429
Thread length based on standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Standard thread tolerance according to ASME B1.1 = 2A (for male thread)
Datasheets(X)
 | |
Nominal diameter (d1) | 1/2 in |
Length (l1) | 2 in |
Thread type | UNC |
Head height (k1) | 0.323 in |
External drive (s1) | WS3/4 |
Material | Steel |
Property class | GR8 |
Surface | Zinc plated |
Width across flats | 3/4 inch |
Other standard | 0 - not applicable |
Last viewed
Cable grommet with perforated membrane CR
TX bit C 6.3 (1/4 inch) with hole
Securing shackle W-GFIXB 927
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Solid carbide contour miller, plastic, with spur cut
Grooved taper-pin ISO 8744 steel plain
Washer
Round cross bar For H95 DWD XP drawer frames
Plus Longlife & Speed extra-wide tile chisel
Low-cut safety shoes, S3