Hexagonal bolt
ASME B18.2.1 steel GR8 zinc-plated yellow
SCR-HCS-GR8-(ZY)-1/4_28X3
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Datasheets(X)
 | |
Nominal diameter (d1) | 1/4 in |
Length (l1) | 3 in |
Thread type | UNF |
Head height (k1) | 0.163 in |
External drive (s1) | WS7/16 |
Material | Steel |
Property class | GR8 |
Surface | Zinc plated yellow |
Width across flats | 7/16 inch |
Last viewed
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with seal
High-visibility trousers
Manual taper tap Ruko hand tap HSS DIN 352 Whitworth BSW taper tap
Cheese head screw with hexagon socket ISO 4762/DIN 912, steel 12.9, plain, manufacturer HOLO-KROME®
Low-cut safety shoes S1 ESD
Toilet paper dispenser
NP profile short cylinder In 5-pin system
Groove cutter for wood With cutting bit
Bit bars 8 pieces
ASSY®plus 4 CS MDF universal screw Hardened zinc plated steel partial thread countersunk head