Hexagonal bolt, fully threaded, SB FITTINGS DIN EN 15048-1
ISO4017/4032 steel 8.8 hot dip galv. w. cert. 3.1
Q/SB-I4017/4032-8.8-(HDG)-M16X60-SPE+3.1
Register now and access more than 125,000 products
SB = Structural Bolting; bolts and nuts in accordance with DIN EN 15048 must be marked with the special label "SB".
Thread sizes M8 and M10 with the designation "8.8U" meet the minimum breaking forces and test forces (for bolts and threads in tolerance class 6az) in accordance with EN ISO 10684.
Fittings with bolts with shank (partial thread) consisting of: DIN EN ISO 4014 hexagonal bolt and DIN EN ISO 4032 hexagonal nut
ISO 4017 replaces DIN 933 | There is some similarity | Nominal size extended | Widths across flats for M10, M12, M14 and M22 changed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M16 |
Length (l1) | 60 mm |
Head height (k1) | 10 mm |
External drive (s1) | WS24 |
Standards | ISO 4017, ISO 4032, EN 15048 |
Material | Steel |
Property class | 8.8 |
Surface | Hot dip galvanized |
Head diameter | 24 mm |
Head type | Hexagon head |
Design | With hexagon nut EN ISO 4032 |
Head details | 0 - not applicable |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Full thread |
Thread length (metric thread) | 60 mm |
Product class | A |
Construction product | Yes |
Height of the nut | 14.1 mm |
RoHS-compliant | Yes |
Last viewed
A 507 FS door handle
Edge strip For the end profile of the Premium rubber anti-fatigue mat
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar
Work trousers
1/2 inch torque wrench With push-through square drive and fine toothed ratchet head (72 teeth)
Double furniture castor, swivel With hard tread
Wound dressing
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Shoe accessories
Foam roller WB For water-based paints