Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
ISO 4017/4032, hot-dip galvanised steel 8.8U
SCR-4017-8.8U-NUT-4032-8-(HDG)-M16X25
Register now and access more than 125,000 products
- Non-preloaded structural bolting assemblies for metal construction. Steel 8.8U hot-dip galvanised (TZN).
- Hexagonal bolt, fully threaded, in line with DIN EN ISO 4017 and hexagon nut in line with DIN EN ISO 4032.
SB = Structural Bolting; bolts and nuts in accordance with DIN EN 15048 must be marked with the special label "SB".
Thread sizes M8 and M10 with the designation "8.8U" comply with the minimum break strength and test strength (for threaded bolts of tolerance class 6az) in accordance with EN ISO 10684.
Due to batch traceability, these articles can only be purchased from and stored directly by the manufacturer and are therefore excluded from exchange or return!
ISO 4017 replaces DIN 933 | There is some similarity | Nominal dimensions extended | Width across flats changed for M10, M12, M14 and M22.
Regulated construction product with CE marking.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M16 |
Length (l1) | 25 mm |
Property class | 8.8U |
Head type | Hexagon head |
Thread type | Metric thread |
Construction product | Yes |
Last viewed
Screw plug GPN 700 For metric threads
Right angle attachment
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
Hexalobular-type cheese head screw, low head
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Ring screw A2 stainless steel, plain
Twist drill bit HSS DIN 340 type RN 130°
Extension EN1254, gunmetal, 3526