Hexagonal bolt with flange EN 1665, A2-70 stainless steel, plain
EN 1665 stainless steel A2 70, plain
SCR-HEX-FLG-EN1665-F-A2-70-SW10-M6X35
Register now and access more than 125,000 products
ISO EN 1665 replaces DIN 6921 | There is some limited similarity | Some head heights have been changed | Flange diameter is unchanged | Width across flats changed for M10, M12, M14 and M16, M20 | Strength 12.9 omitted | Fine thread omitted.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 35 mm |
Head diameter (dc) | 14.2 mm |
Head height (k1) | 6.6 mm |
Standards | EN 1665 |
Material | Stainless steel A2 |
Property class | 70 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive (s1) | WS10 |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Thread design | Partial thread |
Thread length (metric thread) | 18 mm |
Product class | A |
Last viewed
Sidewall lining
Countersunk head screw with recessed head, H DIN 965, steel 4.8, nickel-plated (E2J)
Tapered pin, unhardened DIN 1 unhardened steel plain, version B (turned)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Enamel brush
Reserve taper grooved dowel pin ISO 8741 A1 stainless steel plain
Slotted flat-head screws with large head DIN 921, A1 stainless steel, plain
Safety sandals S1
PRIPRESS ® radial clamping jaw With TH contour
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain