Hexagonal bolt with flange
DIN 6921 bare steel 10.9
SCR-HEX-FLG-DIN6921-10.9-M10X70
Register now and access more than 125,000 products
DIN 6921 has been withdrawn and replaced by EN 1665. There is some limited similarity (Some head heights changed | Flange diameter is unchanged | Widths across flats for M10, M12, M14 and M16, M20 changed | Strength 12.9 removed | Fine thread removed).
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M10 |
Length (l1) | 70 mm |
Standards | DIN 6921 |
Material | Steel |
Property class | 10.9 |
Surface | Plain |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
External drive (s1) | WS15 |
Thread type | Metric thread |
Pitch | 1.5 mm |
Last viewed
Stirrup handle on outer plate
Blind rivet, flat head
Mounting plate For VLB 40 hinges
Round head screw with slot and nut W-0231, steel 4.8, zinc-plated with nut, slotted
NP profile double cylinder In 6-pin system
Starline Plus work dungarees
Stepped drill bit, spiral
WÜPLAST® countersunk head screw with Z Phillips head WN 1413, steel 10.9, zinc-nickel-plated, black passivated (P3R)
Capstan screws with slot DIN 404, steel 5.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw