Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
ISO 4014 steel 10.9, zinc flake, silver
SCR-HEX-ISO4014-10.9-(ZFSHL)-M30X245
Register now and access more than 125,000 products
Zinc-flake coatings are chromium (VI)-free corrosion protection coatings for commercial vehicle construction, construction machines, agricultural vehicles and equipment, and all other fields that have vehicle construction standard corrosion protection requirements.
The corrosion resistance of ZFHSL is as follows:
- Diameter ≥ M6 - 480h*
- Diameter ≥ M10 - 720h*
- * Guideline values: No base metal corrosion at points without thread in salt spray tests according to DIN EN ISO 9227 NSS.
The designation ZFSHL refers to the following corrosion coating:
- Zinc flake coating, with top coat, silver colour, with lubrication that alters the friction coefficient.
- Adjusted friction coefficient range from 0.09-0.14 μ due to top coat with integrated lubricating particles
ISO 4014 replaces DIN 931 | There is some similarity | Nominal dimensions extended | Width across flats changed for M10, M12, M14 and M22.
Datasheets(X)
Last viewed
Base plate for square-perforated panel system
Hexagonal bolt with shank DIN 931, steel 10.9, plain
C 6.3 PH bit (1/4 inch)
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
LED warning lamp With automatic twilight function
TX bit
Concrete screw with hexagon head W-BS/S
Green Pin® BN straight shackle
ASSY® 4 CSMP universal screw Zinc-plated steel full thread 90° milling pocket head
Pull handle ST/A100