Hexagonal bolt with shank
ISO 4014 steel 8.8 Dokka hdg with certificate 3.1
Q/BLT-I4014-8.8U-(HDG)-M12X100+3.1
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684)
- The screw is ISO-compliant after hot-dip galvanisation
- Must not be used with nuts with oversized thread under any circumstances. This can create problems in the bolted joint and may cause the connection to fail.
ISO 4014 replaces DIN 931 | There is some similarity | Nominal size extended | Width across flats for M10, M12, M14 and M22 changed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M12 |
Length (l1) | 100 mm |
Head height (k1) | 7.5 mm |
External drive (s1) | WS18 |
Standards | ISO 4014 |
Material | Steel |
Property class | 8.8 |
Surface | Hot dip galvanized |
Head type | Hexagon head |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Partial thread |
Thread length (metric thread) (b) | 30 mm |
Product class | A |
RoHS-compliant | Yes |
Last viewed
Short sanding belt Klingspor LS 309 XH
Cheese head screw with hexagon socket ISO 4762, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
REFILLO®mat filling can
W-VD-A anchor rod A4 stainless steel
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Lance
Seal scraper
Fast grinding polish P10 Plus
ORSY®BULL partition element basic set
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment