Hexagonal bolt with shank
ISO 4014 steel 8.8 Dokka hdg with certificate 3.1
Q/BLT-I4014-8.8U-(HDG)-M16X70+3.1
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684)
- The screw is ISO-compliant after hot-dip galvanisation
- Must not be used with nuts with oversized thread under any circumstances. This can create problems in the bolted joint and may cause the connection to fail.
ISO 4014 replaces DIN 931 | There is some similarity | Nominal size extended | Width across flats for M10, M12, M14 and M22 changed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M16 |
Length (l1) | 70 mm |
Head height (k1) | 10 mm |
External drive (s1) | WS24 |
Standards | ISO 4014 |
Material | Steel |
Property class | 8.8 |
Surface | Hot dip galvanized |
Head type | Hexagon head |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Partial thread |
Thread length (metric thread) (b) | 38 mm |
Product class | A |
RoHS-compliant | Yes |
Last viewed
Spirit level straight edge with bubbles
Cylindrical pin, unhardened DIN 7, A4 stainless steel, plain
Square split spindle 8 mm notched on two sides
Work polo shirt HAKRO 110 ladies' polo shirt Classic
Elbow fitting, flat sealing, with female and male thread EN10242 UA2, plain malleable iron
Cordless impact wrench ASS 18 1/2 inch COMPACT M-CUBE
Slotted cheese head DIN 84, A4 stainless steel, plain
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3789
Cylinder tapping screw, shape C with slot
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain