Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1
ISO4014/4032 steel 8.8 hot dip galv. w. cert. 3.1
Q/SB-I4014/4032-8.8-(HDG)-M16X90-SPE-3.1
Register now and access more than 125,000 products
SB = Structural Bolting; bolts and nuts in accordance with DIN EN 15048 must be marked with the special label "SB".
Thread sizes M8 and M10 with the designation "8.8U" meet the minimum breaking forces and test forces (for bolts and threads in tolerance class 6az) in accordance with EN ISO 10684.
Fittings with bolts with shank (partial thread) consisting of: DIN EN ISO 4014 hexagonal bolt and DIN EN ISO 4032 hexagonal nut
ISO 4014 replaces DIN 931 | There is some similarity | Nominal size extended | Widths across flats for M10, M12, M14 and M22 changed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M16 |
Length (l1) | 90 mm |
Head height (k1) | 10 mm |
External drive (s1) | WS24 |
Standards | ISO 4014, ISO 4032, EN 15048 |
Material | Steel |
Property class | 8.8 |
Surface | Hot dip galvanized |
Head diameter | 24 mm |
Head type | Hexagon head |
Design | With hexagon nut EN ISO 4032 |
Head details | 0 - not applicable |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Partial thread |
Shank diameter | 16 mm |
Thread length (metric thread) | 38 mm |
Product class | A |
Construction product | Yes |
Height of the nut | 14.1 mm |
RoHS-compliant | Yes |
Last viewed
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A4-070 stainless steel, plain
Information frame, write-on, magnetic
Grooved taper-pin ISO 8744 steel plain
Work coat
Half-shell trapezoidal crimping insert
Gravel throw and underbody protection
EPS profile double cylinder
Work dungarees
Adaptation profile 40 For closing sequence selector on the non-hinge side (SR-BG)
Ring grommet