Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, plain
ISO 4014 steel 5.6 plain AD W 7/1
SCR-HEX-ISO4014-ADW7-5.6-WS41-M27X250
Register now and access more than 125,000 products
Hexagon head bolts with shank for pressure vessel construction according to AD regulations. The AD 2000 Code of Practice documents are created by the "Working Group for Pressure Vessels".
- Hexagonal bolts in accordance with DIN EN ISO 4014, strength class 5.6, are used with hexagonal nuts in accordance with DIN EN ISO 4032, strength class 5-2.
- TÜV-recognised make. Meet the conditions of AD/AD 2000 Code of Practice W 7/1 (formerly W 7) with regard to waiving the test certificate 3.1. (in line with DIN EN 10204). See VdTÜV material data sheet 1253/4. “VdTÜV data sheet 1253/4” contains the bolt and nut manufacturers inspected by an expert from the German Technical Supervisory Organisation (TÜO). The products are labelled with the manufacturer's code and strength class.
- ISO 4014 replaces DIN 931 | There is some similarity | Nominal dimensions extended | Width across flats changed for M10, M12, M14 and M22.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M27 |
Length (l1) | 250 mm |
Head height (k1) | 17 mm |
Standards | ISO 4014 |
Property class | 5.6 |
Head type | Hexagon head |
Thread type | Metric thread |
Pitch | 3 mm |
Last viewed
Fitting, flat sealing EN1254, gunmetal, 4330
Die-cast zinc base with anti-slip plate
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Load block with captive screw
Installation box shower tray flush-mounted mixer masonry
Rectangular rail set Nova Pro Scala For H90 pot drawer with wooden back panel
ASSY® 4 WH washer head screw Steel zinc plated partial thread washer head
Hexagonal bolt with half dog point and small hexagon
Hexagon nut, inch
Wood screw Hexagon head DIN 571, A4 stainless steel