Hexagonal bolt with thread up to head
ISO 4017 steel 8.8U hot dip galvanized
SCR-HEX-ISO4017-8.8U-WS50-(HDG)-M33X130
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684).
- The bolts are ISO-compliant after hot-dip zinc-plating.
- The bolts must not be used with nuts that have an oversized thread. This can create problems in the bolted joint and may cause the connection to fail.
Controlled construction products with CE marking => SB sets in accordance with DIN EN 15048-1 can be supplied with item prefix numbers: 00594.. (hex head headless screws) and 00595.. (hex head full-thread screws).
ISO 4017 replaces DIN 933 | There is some similarity | Nominal dimensions extended | Width across flats changed for M10, M12, M14 and M22.
Datasheets(X)
Last viewed
Base height adjuster type EV-S for screwing on With electrical height adjustment using optional cordless pliers
Hexagonal bolt with shank
Clamping pin/clamping sleeve
Perforated sleeve WIT-SH WIT-SH for ALLROUNDER WIT-VM 250 injection systems
Hexagonal nut, low profile ISO 4035 steel 04, zinc flake silver (ZFSHL)
Plastic-coated assembly tape
Panic pin, split, 9 mm with drill hole at front and longitudinal groove
VDE replacement blade
SMART STEP EU+ HSS twist drill bit DIN 338
HPC solid carbide drill Speeddrill 4.0-Universal, DIN 6537K, 3xD short, 4 drill heels, with internal cooling