Hexagonal bolt with thread up to head for pressure container construction
ISO 4017 steel 5.6 hot dip galvanized AD W 7/1
SCR-I4017-5.6-(TZN)-ADW7/1-WS24-M16X35
Register now and access more than 125,000 products
Hexagonal bolts with full thread for pressure container construction according to AD/TRD regulations.
- Hexagonal bolts in accordance with DIN EN ISO 4017, strength class 5.6, are used with hexagon nuts in accordance with DIN EN ISO 4032, strength class 5-2.
- TÜV-recognised make. Fulfil the conditions of AD/AD 2000 Code of Practice W7 and TRD 106 in regard to waiving of test certificate 3.1 (in accordance with DIN EN 10204). See VdTÜV material data sheet 1253/4. “VdTÜV data sheet 1253/4” contains the bolt and nut manufacturers inspected by an expert from the German Technical Supervisory Organisation (TÜO). The products are labelled with the manufacturer's code and strength class.
ISO 4017 replaces DIN 933 | There is some similarity | Nominal dimensions extended | Width across flats changed for M10, M12, M14 and M22.
 | |
Thread type x nominal diameter (d1) | M16 |
Length (l1) | 35 mm |
Head height (k1) | 10 mm |
Standards | ISO 4017 |
Material | Steel |
Property class | 5.6 |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Outer hexagon |
External drive (s1) | WS24 |
Thread type | Metric thread |
Pitch | 2 mm |
Thread form | Standard metric thread |
Product class | A |
Area of application | Pressure vessel construction |
Regulated area | AD W 7/1 |
Datasheets(X)
Last viewed
Combination screw tap assortment HSCo Multi Performance M3-M10 6 pcs
Manual screw tap, third tap Ruko hand tap HSS DIN 2181 fine thread third tap
Inside drawer For system hinged door cabinet
Terminal block without wire guard
Safety sandals, S1
Twist drill bit HSCo DIN 338 MFD Speed
Weatherproof jacket
Shoe accessories
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Spacer stud, polyamide, hex, F/M
