Hexagonal bolt with thread up to the head
ISO 4017 steel 8.8 Dokka hdg with certificate 3.1
Q/SCR-I4017-8.8U-(HDG)-M24X60+3.1
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684).
- The bolts are ISO-compliant after hot-dip galvanisation.
- The bolts must not be used with nuts that have an oversized thread. This can create problems in the bolted joint and may cause the connection to fail.
ISO 4017 replaces DIN 933 | There is some similarity | Nominal size extended | Width across flats for M10, M12, M14 and M22 changed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M24 |
Length (l1) | 60 mm |
Head height (k1) | 15 mm |
External drive (s1) | WS36 |
Standards | ISO 4017 |
Material | Steel |
Property class | 8.8 |
Surface | Hot dip galvanized |
Head type | Hexagon head |
Head details | 0 - not applicable |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | 0 - not applicable |
Thread design | Full thread |
Product class | A |
Construction product | 0 - not applicable |
EC declaration of conformity (CE) | No |
RoHS-compliant | Yes |
Last viewed
Work trousers
Electric power tool set
STC+ end mill Turbo-Twister-Uni, five-cutter, unequal twist gradient, 5xD
Slotted countersunk head screw DIN 963, steel 4.8, nickel-plated (E2J)
TIPP® Smartlock GS pipe clamp
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Reducing bushes set Three pieces for transmission jack piston rod
Round wire snap ring and snap ring groove for drill holes
VDE screwdriver For hexagon drive
Screwdriver TX long with round shank